tsetse.org

HOME | DECISION TOOLS | TSETSE FAQ | BAIT TECHNOLOGIES | ABOUT US | SEARCH
HOME
TSETSE FAQ
Tsetse biology
Tsetse & Tryps
Catching tsetse
Targets
Insecticide-treated cattle
Socioeconomic questions
Environmental questions
References

Catching tsetse

What type of netting should I use?

The netting must be strong enough to withstand the elements and to give a good base for any sewing to which it is subjected. The "holes" in the netting should be no more than about 4mm across, ie, small enough to prevent tsetse from squeezing through.

For some types of trap, eg, the Epsilon, the netting cone is not visible from outside the trap and so plays no part in visual attraction from a distance. Hence, the colour of the netting is usually not important, provided the netting allows plenty of light to pass through.

Vavoua trap in UgandaFor traps such as the Biconical and Pyramidal, the netting cone is visible from outside the trap and is regarded as an important component of visual attractiveness. For such traps the netting is usually recommended to be bright white. However, the netting should not be so substantial as to block more than 50% of through light.

The type of fibre for the netting is usually not crucial. Cotton or polyester will do. In Zimbabwe a plastic-coated fibreglass netting has proved highly satisfactory.

Targets recommended in the past incorporated netting panels, as with the roofed screens used in Zimbabwe in 1980 and the Rifa and Swinger targets used in that country in the mid and late 1980s. Such netting was recommended to be fine, black, textured polyester.

However, none of the targets now recommended by Tsetse Plan incorporate netting.


Ask another question about catching tsetse?
Ask another question?

French FlagFrench site